
Add to Cart
Maintenance Free 6-Qw-80H Rechargeable Automotive Lead Acid Battery For car start stop
>Main Features
DRY CHARGED CAR BATTERY
1. Batteries should be stored in a clean, dry, drough room with 5-40C.
2. Surface of batteries and pole pillar should be kept clean.
3. The electrolyte density poured into at the firs time and the first charging should be done under the instruction. During the usage,
the surface will reduce, please add some water up to the former level.(If the electrolyte flows out, please add electrolyte with same density.)
4 When not use the batteries, take it off from the car, and recharge itso as to prolong its use life.
5. Charge the btteries under the fllowing conditions:
1) The density is less than 1.10.
2) The light is faint.
3) When dichagig. volage of terminal is less than 10.8v.
Start-stop system can reduce the emission and fuel consumption by stopping the engine when the vehicle is idle.
It was initially only installed on high-end vehicles, but has been widely used in recent years on most middle to high-end vehicles due to the
convenience and power-efficiency. Long life,Active atomtechnologyActive atom technology enhances our batteries to have
more material to react and longer life; to have advantaged capacity ratio and excellent consistency.
Model | 6-Qw-80H | Application | Car |
Capacity | 80(20HR) | Certification | CE, ISO9001 |
Dimension | 311*175*190mm | Warranty | 1 Years |
Color | Black | Function | Car starting |
Packing | Colorful Box | MOQ | 50Piece |
Component | Positive | Negative | Container | Cover | Separator | Electrolyte | Valve | Terminal |
Raw material | lead dioxide | Lead | ABS | ABS | AGM | Sulfuric acid | Rubber | Copper |
1. Auto start
2. The yacht to start
3. Start the generator
4. Agricultural machinery